Glassing Transom/Plank Joint

In preparation for glassing the hull, I decided to reinforce a few key areas.DSC00035DSC00036I placed (2) 3″ offset fiberglass strips down the garboard plank junction.  DSC00040 Rear transom/plank junction sanded and ready for fiberglass cloth.  DSC00035DSC00038DSC00039After rolling out the fiberglass, I learned I am way short of completing this next step.  So, I now wait for the additional glass to arrive.

2 thoughts on “Glassing Transom/Plank Joint

  1. Brent – while you are waiting for your fiberglass, maybe you’ll want to fair those pieces you’ve applied. Otherwise you may have trouble getting the glass to lay smooth over them. I think you might have trouble with air bubbles along the edges. — Dave

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s